Self-Propelled Feed Mixer Wagon with Vertical Auger and Q355B Manganese Steel for 18000 Tons/Hour Mixing Speed
| Supporting power: | 280 Horsepower - 360 Horsepower | Number of augers: | 3 |
| Spiral speed: | 22-29 Rpm | Blade thickness: | 16mm |
| Measurement accuracy: | 1/3000 | Production efficiency: | 14400-18000 Kg/h |
| High Light: | Vertical Auger Feed Mixer Wagon,Q355B Manganese Steel TMR Mixer,18000 Tons/Hour Mixing Speed Self-Propelled Feed Mixer |
||
9JQL Vertical Traction TMR Parameter Table
| project | Details | Standard configuration parameters |
|---|---|---|
|
move force department point |
Model Specifications | 9JQL-36 |
| Supporting power | 280 horsepower - 360 horsepower | |
| speed reducer | R-series hardened gear planetary reducers | |
| Gearbox Brands | Imported Kangmaier products, domestically produced Jiangling products | |
| model | XHG05-51000.01 | |
| Two-stage reducer | Jiangling | |
| model | XHG07-51000.03 | |
|
all machine and stir mix department point |
Spiral Dragon Form | Vertical |
| Number of augers | 3 | |
| Spiral material | Q355B manganese steel plate or NM360 wear-resistant steel plate | |
| Spiral speed | 22-29 rpm | |
| blade thickness | 16mm | |
| Blade material | Tungsten carbide alloy | |
| Number of blades | 21st CPC | |
| Blade thickness | ≤10mm | |
| Blade lifespan | ≥1500 hours | |
| Drive shaft (CM) | 1850mm | |
| Box thickness and material | 10mm Q355B manganese plate | |
| Base plate thickness and material | 20mm Q355B manganese plate | |
| Box filling method | Open | |
| Stirring speed | 18,000 tons/hour | |
| Each work time | 25 minutes | |
| Mixing time | 10 minutes | |
| Mixing uniformity | Binzhou screening test passed | |
| Forage cutting length | The length of the forage can vary from 2-6cm depending on the mixing time. | |
| Number of tires | 8 | |
| Tire specifications | Tire size 295/60R22.5 | |
|
Weighing section |
Weighing system | Imported Italian DG/American Aesthetica 7.5T |
| Weighing sensor | 4 support points | |
| Protection rating of weighing indicator | IP67 | |
| Weighing indicator control method | Fully automatic | |
| Sensor maximum range | 30T | |
| Measurement accuracy | 1/3000 | |
| Weighing indicator voltage | 12V | |
|
Discharge section |
Control method | Hydraulic manual control valve |
| Number of doors opened | bilateral | |
| Production efficiency (KG/H) | 14400-18000 kg/h | |
| Total weight (kg) | (kg) | |
| Overall machine dimensions (mm) | Approximately 9800*2550*3300 mm, subject to actual production specifications. | |
|
Note: Mechanical transmission is not allowed when using electric power; they must be separated (either mechanical or electric only). Tractor output requirement: 540 r/min |
||
4WD Double Auger Silage Feed Wagon TMR Mixers Cow Milk Yield Boost Breeding
Self-propelled TMR feed mixer is a self-propelled full-automatic TMR total mixed ration equipment independently developed by our factory, integrating new energy power, intelligent weighing, automatic silage cutting, high-uniformity mixing and on-site feeding. It adopts the integr
Intelligent Diet Vertical Mixer Feed Wagon Hydrostatic Drive For Cattle Sheep Farm
Self-propelled TMR feed mixer is a self-propelled full-automatic TMR total mixed ration equipment independently developed by our factory, integrating new energy power, intelligent weighing, automatic silage cutting, high-uniformity mixing and on-site feeding. It adopts the integr
ODM Self Propelled TMR Feed Mixer Wagon Mixer Integrated Mixing Stirring Conveying And Feeding
One Person Full Operation Electric Self Propelled Tmr Feed Mixer Integrated Mixing Stirring Conveying And Feeding Product Overview Integrated mixing, stirring, conveying and feeding system with pure electric zero-emission design. This self-propelled TMR feed mixer combines automatic material ...
290HP Self Propelled Feed Mixer Wagon For Cattle Livestock Intake
Energy Saving Self-Propelled Feed Mixer: Uniform Feed Mixing to Improve Livestock Intake Product Overview IMETEC self-propelled TMR (Total Mixed Ration) feed mixers are integrated feeding solutions that combine loading, mixing, weighing, and spreading in a single machine. They replace traditional ...
